Fourteen-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Non-carious Cervical Lesions.

PURPOSE: This randomized controlled trial aimed to evaluate the 14-year clinical performance of a HEMA-free 1-step self-etch adhesive (1SEa) compared with that of a 3-step etch-and-rinse adhesive (3E&Ra). MATERIALS AND METHODS: 267 non-carious cervical lesions in 52 patients were restored with the microhybrid composite Gradia Direct (GC), bonded in random order either with the HEMA-free 1SEa G-Bond (GB; GC) or the 3E&Ra Optibond FL (OFL; Kerr), which is considered the gold-standard E&Ra (control). The restorations were followed over 14 years for retention, marginal adaptation and discoloration, and caries occurrence. Statistical analysis involved a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 14 years was 63%. In total, 79 restorations (39 GB, 40 OFL) failed because of retention loss (GB: 19.4%, OFL: 19.6%), severe marginal defects, discoloration and/or caries (GB: 21.7%; OFL: 22.5%). The overall clinical success rate was 58.9% and 57.9% for GB and OFL, respectively. The number of restorations with an unacceptable marginal defect (GB: 14.5%; OFL: 19.2%) and deep marginal discoloration (GB: 18.2%; OFL: 13.2%) increased during the last 5 years. No significant difference in overall clinical performance was recorded between the two adhesives (p > 0.05). Changes in the medical health of some patients and recurrence of abrasion/erosion/abfraction increased the failure rate and retention rate. CONCLUSION: After 14 years, restorations bonded with the HEMA-free 1SEa performed as well as those bonded with the 3E&Ra gold standard. Unacceptable marginal deterioration was the main reason for failure, followed by loss of retention.

Three-year Clinical Performance of a Universal Adhesive in Non-Carious Cervical Lesions.

PURPOSE: The aim of this randomized controlled clinical trial was to evaluate the 3-year clinical performance of a universal adhesive (Clearfil Universal Bond Quick (CUBQ); Kuraray Noritake) when restoring non-carious cervical lesions (NCCLs) using two different application modes (etch-and-rinse vs self-etch with prior selective enamel etching). MATERIALS AND METHODS: Fifty-one patients participated in this study. A total of 251 NCCLs (n = 251) were assigned to two groups: 1) CUBQ applied in etch-and-rinse mode (n = 122; CUBQ-ER) and 2) CUBQ applied in self-etch mode with prior selective etching of enamel with phosphoric acid (n = 129; CUPQ-SEE). The same resin composite, Clearfil Majesty ES-2 (Kuraray Noritake), was used for all restorations. The restorations were evaluated at baseline, 1 and 3 years using FDI criteria: marginal staining, fracture and retention, marginal adaptation, post-operative sensitivity and recurrence of caries. Statistical analysis was performed using a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 3 years was 90%. After 3 years, both groups presented an increase in the percentage of small but still clinically acceptable marginal defects (CUBQ-ER: 67%, CUBQ-SEE: 63.2%) and marginal staining (CUBQ-ER: 32.6%, CUBQ-SEE: 31.7%). The overall success rate was 82.6% and 83.8% for CUBQ-ER and CUBQ-SEE, respectively. In total, 38 restorations (19 CUBQ-ER, 19 CUBQ-SEE) failed because of loss of retention, fracture, severe marginal defect and/or marginal discoloration. A retention rate of 87.2% and 86.3% was recorded for CUBQ-ER and CUBQ-SEE, respectively. No significant difference was observed between the two bonding-mode groups for any of the evaluated parameters. CONCLUSION: After 3 years of clinical service, Clearfil Universal Bond Quick performed similarly in etch-and-rinse and self-etch modes with prior selective enamel etching.

On the cutting edge of glioblastoma surgery: where neurosurgeons agree and disagree on surgical decisions.

OBJECTIVE: The aim of glioblastoma surgery is to maximize the extent of resection while preserving functional integrity. Standards are lacking for surgical decision-making, and previous studies indicate treatment variations. These shortcomings reflect the need to evaluate larger populations from different care teams. In this study, the authors used probability maps to quantify and compare surgical decision-making throughout the brain by 12 neurosurgical teams for patients with glioblastoma. METHODS: The study included all adult patients who underwent first-time glioblastoma surgery in 2012-2013 and were treated by 1 of the 12 participating neurosurgical teams. Voxel-wise probability maps of tumor location, biopsy, and resection were constructed for each team to identify and compare patient treatment variations. Brain regions with different biopsy and resection results between teams were identified and analyzed for patient functional outcome and survival. RESULTS: The study cohort consisted of 1087 patients, of whom 363 underwent a biopsy and 724 a resection. Biopsy and resection decisions were generally comparable between teams, providing benchmarks for probability maps of resections and biopsies for glioblastoma. Differences in biopsy rates were identified for the right superior frontal gyrus and indicated variation in biopsy decisions. Differences in resection rates were identified for the left superior parietal lobule, indicating variations in resection decisions. CONCLUSIONS: Probability maps of glioblastoma surgery enabled capture of clinical practice decisions and indicated that teams generally agreed on which region to biopsy or to resect. However, treatment variations reflecting clinical dilemmas were observed and pinpointed by using the probability maps, which could therefore be useful for quality-of-care discussions between surgical teams for patients with glioblastoma.

Mini-iFT Confirms Superior Adhesive Luting Performance using Light-curing Restorative Composites.

PURPOSE: To validate the rationale of using a conventional light-curing resin-based composite (RBC) to lute thick indirect restorations by measuring mini-interfacial fracture toughness (mini-iFT). MATERIALS AND METHODS: Freshly exposed dentin of extracted third molars (n = 64) was immediately sealed with a thin layer of an experimental RBC with a 50 wt% or 75 wt% (IDS) filler load. Two- or 6-mm-thick CAD/CAM composite blocks were luted onto IDS using either pre-heated light-cure or dual-cure luting RBC, with the latter having served as control. Samples were cut into sticks, upon which a notch was prepared at the interface between IDS and luting RBC, prior to being submitted to a 4-point bending test to determine mini-iFT. The results were analyzed using a mixed linear model (LME). Failure mode at the fractured interface was determined using scanning electron microscopy (SEM). RESULTS: LME revealed that mini-iFT was not significantly affected by the composite block thickness (p = 0.39), but by the luting RBC (p < 0.0001) and the IDS RBC filler load (p = 0.0011). Mini-iFT was higher with 50 wt% filler-loaded RBC IDS and when luted using the light-curing RBC. CONCLUSION: This work provides the proof of concept that 2- and 6-mm-thick indirect restorations can safely be adhesively luted with pre-heated conventional light-cure RBC under controlled light-irradiation conditions. This strategy even seems beneficial in terms of mini-iFT compared to using a dual-cure luting RBC. IDS with lower filler content also appeared more favorable.

Six-year Clinical Performance of a 2-step Self-etch Adhesive in Noncarious Cervical Lesions.

PURPOSE: Mild and intermediately strong 2-step self-etch adhesives (2SEa) have been shown to bond efficiently to dentin. In general, their bonding efficiency to enamel is inferior to that of etch & rinse adhesives (E&Ra). On the other hand, their application procedure is less elaborate, and consequently leaves less room for application mistakes. The aim of this randomized controlled trial was to evaluate the clinical performance of an intermediately strong 2SEa, as compared with that of a 3-step E&Ra after 6 years of clinical functioning. MATERIALS AND METHODS: 239 non-carious cervical lesions in 50 patients were restored with the nanohybrid composite Herculite XRV (Kerr), bonded in random order either with the 2SEa Optibond XTR ('O-XTR', Kerr) or the gold-standard control 3E&Ra Optibond FL ('O-FL', Kerr). The restorations were recalled after 1, 2 and 6 years of clinical service and examined for retention, marginal adaptation, marginal discoloration, caries occurrence, and postoperative sensitivity. Statistical analysis was performed using a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 6 years was 94%. The overall clinical success rate was 81.9% and 80.9% for O-XTR and O-FL, respectively. In total, 42 restorations (21 O-XTR, 21 O-FL) failed because of retention loss, severe abfraction/abrasion/erosion, severe marginal defects and/or discoloration, and/or caries. A retention rate of 92.9% and 88.9% was recorded for O-XTR and O-FL, respectively. Progressive marginal deterioration was observed over the 6-year period. Small clinically acceptable marginal defects were recorded in about 70% of the restorations (O-XTR: 69.9%; O-FL: 74.1%). Regarding marginal discoloration, 37% of the O-XTR and 30.2% of the O-FL restorations showed superficial clinically acceptable marginal discoloration. Six O-XTR and 4 O-FL restorations exhibited caries at the restoration margin. No significant difference was observed between the two groups for any of the evaluated parameters (p > 0.05). CONCLUSION: After 6 years of clinical service, Class-V restorations bonded with the 2SEa performed clinically equally well as those bonded with the 3E&Ra.

Accurate MR Image Registration to Anatomical Reference Space for Diffuse Glioma.

To summarize the distribution of glioma location within a patient population, registration of individual MR images to anatomical reference space is required. In this study, we quantified the accuracy of MR image registration to anatomical reference space with linear and non-linear transformations using estimated tumor targets of glioblastoma and lower-grade glioma, and anatomical landmarks at pre- and post-operative time-points using six commonly used registration packages (FSL, SPM5, DARTEL, ANTs, Elastix, and NiftyReg). Routine clinical pre- and post-operative, post-contrast T1-weighted images of 20 patients with glioblastoma and 20 with lower-grade glioma were collected. The 2009a Montreal Neurological Institute brain template was used as anatomical reference space. Tumors were manually segmented in the patient space and corresponding healthy tissue was delineated as a target volume in the anatomical reference space. Accuracy of the tumor alignment was quantified using the Dice score and the Hausdorff distance. To measure the accuracy of general brain alignment, anatomical landmarks were placed in patient and in anatomical reference space, and the landmark distance after registration was quantified. Lower-grade gliomas were registered more accurately than glioblastoma. Registration accuracy for pre- and post-operative MR images did not differ. SPM5 and DARTEL registered tumors most accurate, and FSL least accurate. Non-linear transformations resulted in more accurate general brain alignment than linear transformations, but tumor alignment was similar between linear and non-linear transformation. We conclude that linear transformation suffices to summarize glioma locations in anatomical reference space.

Quantifying eloquent locations for glioblastoma surgery using resection probability maps.

OBJECTIVE: Decisions in glioblastoma surgery are often guided by presumed eloquence of the tumor location. The authors introduce the "expected residual tumor volume" (eRV) and the "expected resectability index" (eRI) based on previous decisions aggregated in resection probability maps. The diagnostic accuracy of eRV and eRI to predict biopsy decisions, resectability, functional outcome, and survival was determined. METHODS: Consecutive patients with first-time glioblastoma surgery in 2012-2013 were included from 12 hospitals. The eRV was calculated from the preoperative MR images of each patient using a resection probability map, and the eRI was derived from the tumor volume. As reference, Sawaya's tumor location eloquence grades (EGs) were classified. Resectability was measured as observed extent of resection (EOR) and residual volume, and functional outcome as change in Karnofsky Performance Scale score. Receiver operating characteristic curves and multivariable logistic regression were applied. RESULTS: Of 915 patients, 674 (74%) underwent a resection with a median EOR of 97%, functional improvement in 71 (8%), functional decline in 78 (9%), and median survival of 12.8 months. The eRI and eRV identified biopsies and EORs of at least 80%, 90%, or 98% better than EG. The eRV and eRI predicted observed residual volumes under 10, 5, and 1 ml better than EG. The eRV, eRI, and EG had low diagnostic accuracy for functional outcome changes. Higher eRV and lower eRI were strongly associated with shorter survival, independent of known prognostic factors. CONCLUSIONS: The eRV and eRI predict biopsy decisions, resectability, and survival better than eloquence grading and may be useful preoperative indices to support surgical decisions.

Robust Deep Learning-based Segmentation of Glioblastoma on Routine Clinical MRI Scans Using Sparsified Training.

PURPOSE: To improve the robustness of deep learning-based glioblastoma segmentation in a clinical setting with sparsified datasets. MATERIALS AND METHODS: In this retrospective study, preoperative T1-weighted, T2-weighted, T2-weighted fluid-attenuated inversion recovery, and postcontrast T1-weighted MRI from 117 patients (median age, 64 years; interquartile range [IQR], 55-73 years; 76 men) included within the Multimodal Brain Tumor Image Segmentation (BraTS) dataset plus a clinical dataset (2012-2013) with similar imaging modalities of 634 patients (median age, 59 years; IQR, 49-69 years; 382 men) with glioblastoma from six hospitals were used. Expert tumor delineations on the postcontrast images were available, but for various clinical datasets, one or more sequences were missing. The convolutional neural network, DeepMedic, was trained on combinations of complete and incomplete data with and without site-specific data. Sparsified training was introduced, which randomly simulated missing sequences during training. The effects of sparsified training and center-specific training were tested using Wilcoxon signed rank tests for paired measurements. RESULTS: A model trained exclusively on BraTS data reached a median Dice score of 0.81 for segmentation on BraTS test data but only 0.49 on the clinical data. Sparsified training improved performance (adjusted P < .05), even when excluding test data with missing sequences, to median Dice score of 0.67. Inclusion of site-specific data during sparsified training led to higher model performance Dice scores greater than 0.8, on par with a model based on all complete and incomplete data. For the model using BraTS and clinical training data, inclusion of site-specific data or sparsified training was of no consequence. CONCLUSION: Accurate and automatic segmentation of glioblastoma on clinical scans is feasible using a model based on large, heterogeneous, and partially incomplete datasets. Sparsified training may boost the performance of a smaller model based on public and site-specific data.Supplemental material is available for this article.Published under a CC BY 4.0 license.

Secondary caries: prevalence, characteristics, and approach.

OBJECTIVES: The objectives of this cross-sectional survey were to determine the prevalence of secondary caries (SC) in general population, to identify patient- and material-related factors which may affect the prevalence, and to describe some clinical characteristics of SC lesions. MATERIALS AND METHODS: A total of 4036 restorations in 450 patients, who visited the university dental clinic for a regular (half) yearly checkup, were examined clinically (and radiographically) for the presence of SC. Clinical characteristics of the detected SC lesions (size, activity, and location) and the planned treatment were recorded. In addition, patients' caries-risk status was assessed according to the modified "cariogram" model. RESULTS: In total, 146 restorations were diagnosed with SC, which gives an overall prevalence of 3.6%. Restorative material, restoration class, patient's caries risk, and smoking habits were shown to be important factors, as SC prevalence was significantly higher with composites, class II restorations, high-caries-risk patients, and smokers. Restorations' gingival margins were most frequently affected by SC. The largest number of restorations with SC (72%) was scheduled for the replacement. CONCLUSIONS: Prevalence of SC was higher with composite than with amalgam restorations, irrespective of the patient's caries-risk status. Gingival margins of class II, including MOD restorations, seem to be the place of less resistance to SC development. Management of SC seems to place a considerable burden on the health care workforce and expenditure. CLINICAL RELEVANCE: Secondary caries (SC) is considered to be the main cause of dental restoration failure and one of the biggest clinical challenges related to dental composites. Nevertheless, its prevalence in daily practice is still not clear, which impedes an accurate estimation of its impact on health care costs.

The effect of water spray on the release of composite nano-dust.

OBJECTIVE: To evaluate the collection efficiency of water spray on the release of airborne composite particles during grinding of composite materials. MATERIALS AND METHODS: Composite sticks (L:35 mm × W:5.4 mm × H:1.6 mm) of seven commercial dental composites were ground with a rough diamond bur (grain size 100 µm, speed 200,000 rpm). All experiments were performed in an enclosed 1-m3 chamber with low particulate background (< 1,000 #/cm3), and airborne particles were evaluated based on their electrical mobility. The number size distribution was determined by scanning mobility particle sizer (SMPS). Particles were collected by an electrostatic precipitator (ESP), and were ultramorphologically and chemically analyzed by a transmission electron microscope equipped with energy-dispersive X-ray spectroscopy (TEM-EDS). RESULTS: SMPS measurements confirmed that both dry and wet grinding generated high concentrations of nanoparticles particles with the highest concentration recorded during the last minute of grinding (1.80 × 106 - 3.29 × 106#/cm3), after which a gradual decline in particle concentration took place. Nevertheless, grinding with water spray resulted in a significant reduction of the number of released particles (5.6 × 105 - 1.37 × 106#/cm3). The smallest particle diameter was recorded during the last minute of grinding followed by a continuous growth for every next measurement. TEM of composite dust revealed a high concentration of particles varying in both size and shape. CONCLUSIONS: Regardless of whether the water cooling spray system was used during bur manipulation of composite materials, predominately nanoparticles were released. However, the particle concentrations were significantly decreased with water spray. CLINICAL RELEVANCE: Since water spray might not be sufficient in nanoparticle collection, special care should be taken to prevent inhalation of composite dust.

Quantitative Third Harmonic Generation Microscopy for Assessment of Glioma in Human Brain Tissue.

Distinguishing tumors from normal brain cells is important but challenging in glioma surgery due to the lack of clear interfaces between the two. The ability of label-free third harmonic generation (THG) microscopy in combination with automated image analysis to quantitatively detect glioma infiltration in fresh, unprocessed tissue in real time is assessed. The THG images reveal increased cellularity in grades II-IV glioma samples from 23 patients, as confirmed by subsequent hematoxylin and eosin histology. An automated image quantification workflow is presented for quantitative assessment of the imaged cellularity as a reflection of the degree of glioma invasion. The cellularity is validated in three ways: 1) Quantitative comparison of THG imaging with fluorescence microscopy of nucleus-stained samples demonstrates that THG reflects the true tissue cellularity. 2) Thresholding of THG cellularity differentiates normal brain from glioma infiltration, with 96.6% sensitivity and 95.5% specificity, in nearly perfect (93%) agreement with pathologists. 3) In one patient, a good correlation between THG cellularity and preoperative magnetic resonance and positron emission tomography imaging is demonstrated. In conclusion, quantitative real-time THG microscopy accurately assesses glioma infiltration in ex vivo human brain samples, and therefore holds strong potential for improving the accuracy of surgical resection.

Do Universal Adhesives Benefit from an Extra Bonding Layer?

PURPOSE: Universal adhesives use a combined primer/bonding resin applied either in 2-step etch-and-rinse (2-E&R) or 1-step self-etch (1-SE) mode. This study investigated whether three universal adhesives would benefit from an extra bonding layer (EBL), essentially making them 3-step E&R (3-E&R) and 2-SE adhesives, respectively. MATERIALS AND METHODS: Microtensile bond strengths (µTBSs) to bur-cut dentin of Clearfil Universal Bond Quick (C-UBq, Kuraray Noritake), G-Premio Bond (G-PrB, GC) and Prime&Bond Active (P&Ba, Dentsply Sirona) were compared to those of the 2-SEa Clearfil SE Bond 2 (C-SE2, Kuraray Noritake) which was also employed in 3-E&R mode. A split-tooth design was applied with each adhesive used in E&R and SE mode on each tooth, half without/with EBL (C-SE2 Bond). All adhesives were light cured after application of the final layer. The µTBS of one-third of the specimens was measured after 1-month water storage without thermocycling (TC), with the remaining two-thirds aged with 25,000 and 50,000 TCs. All µTBSs were statistically analyzed using a linear mixed-effects model with specific contrasts (p < 0.05). RESULTS: Overall, the four variables (adhesive, bonding mode, EBL, aging) significantly influenced µTBS. Solely G-PrB benefited from EBL when applied in SE mode. In E&R mode, P&Ba generally resulted in the highest µTBSs, C-UBq presented with intermediate and G-PrB with the lowest µTBSs, where the latter was significantly lower than the µTBSs recorded for C-SE2. In SE mode, P&Ba generally resulted in the highest µTBSs in 1- and 2-SE mode. Equally high µTBSs were recorded for G-PrB in 2-SE mode with EBL. Lower µTBSs were recorded for G-PrB in 1-SE mode and for C-UBq in 1- and 2-SE mode. CONCLUSION: The overall effect of EBL on immediate and aged bonding efficacy depended on the specific universal adhesive and its bonding mode.

Comparing Glioblastoma Surgery Decisions Between Teams Using Brain Maps of Tumor Locations, Biopsies, and Resections.

PURPOSE: The aim of glioblastoma surgery is to maximize the extent of resection while preserving functional integrity, which depends on the location within the brain. A standard to compare these decisions is lacking. We present a volumetric voxel-wise method for direct comparison between two multidisciplinary teams of glioblastoma surgery decisions throughout the brain. METHODS: Adults undergoing first-time glioblastoma surgery from 2012 to 2013 performed by two neuro-oncologic teams were included. Patients had had a diagnostic biopsy or resection. Preoperative tumors and postoperative residues were segmented on magnetic resonance imaging in three dimensions and registered to standard brain space. Voxel-wise probability maps of tumor location, biopsy, and resection were constructed for each team to compare patient referral bias, indication variation, and treatment variation. To evaluate the quality of care, subgroups of differentially resected brain regions were analyzed for survival and functional outcome. RESULTS: One team included 101 patients, and the other included 174; 91 tumors were biopsied, and 181 were resected. Patient characteristics were largely comparable between teams. Distributions of tumor locations were dissimilar, suggesting referral bias. Distributions of biopsies were similar, suggesting absence of indication variation. Differentially resected regions were identified in the anterior limb of the right internal capsule and the right caudate nucleus, indicating treatment variation. Patients with (n = 12) and without (n = 6) surgical removal in these regions had similar overall survival and similar permanent neurologic deficits. CONCLUSION: Probability maps of tumor location, biopsy, and resection provide additional information that can inform surgical decision making across multidisciplinary teams for patients with glioblastoma.

FAst Segmentation Through SURface Fairing (FASTSURF): A novel semi-automatic hippocampus segmentation method.

OBJECTIVE: The objective is to present a proof-of-concept of a semi-automatic method to reduce hippocampus segmentation time on magnetic resonance images (MRI). MATERIALS AND METHODS: FAst Segmentation Through SURface Fairing (FASTSURF) is based on a surface fairing technique which reconstructs the hippocampus from sparse delineations. To validate FASTSURF, simulations were performed in which sparse delineations extracted from full manual segmentations served as input. On three different datasets with different diagnostic groups, FASTSURF hippocampi were compared to the original segmentations using Jaccard overlap indices and percentage volume differences (PVD). In one data set for which back-to-back scans were available, unbiased estimates of overlap and PVD were obtained. Using longitudinal scans, we compared hippocampal atrophy rates measured by manual, FASTSURF and two automatic segmentations (FreeSurfer and FSL-FIRST). RESULTS: With only seven input contours, FASTSURF yielded mean Jaccard indices ranging from 72(±4.3)% to 83(±2.6)% and PVDs ranging from 0.02(±2.40)% to 3.2(±3.40)% across the three datasets. Slightly poorer results were obtained for the unbiased analysis, but the performance was still considerably better than both tested automatic methods with only five contours. CONCLUSIONS: FASTSURF segmentations have high accuracy and require only a fraction of the delineation effort of fully manual segmentation. Atrophy rate quantification based on completely manual segmentation is well reproduced by FASTSURF. Therefore, FASTSURF is a promising tool to be implemented in clinical workflow, provided a future prospective validation confirms our findings.

Novel imaging phantom for accurate and robust measurement of brain atrophy rates using clinical MRI.

Brain volume loss, or atrophy, has been proven to be an important characteristic of neurological diseases such as Alzheimer's disease and multiple sclerosis. To use atrophy rate as a reliable clinical biomarker and to increase statistical power in clinical treatment trials, measurement variability needs to be minimized. Among other sources, systematic differences between different MR scanners are suspected to contribute to this variability. In this study we developed and performed initial validation tests of an MR-compatible phantom and analysis software for robust and reliable evaluation of the brain volume loss. The phantom contained three inflatable models of brain structures, i.e. cerebral hemisphere, putamen, and caudate nucleus. Software to reliably quantify volumes form the phantom images was also developed. To validate the method, the phantom was imaged using 3D T1-weighted protocols at three clinical 3T MR scanners from different vendors. Calculated volume change from MRI was compared with the known applied volume change using ICC and mean absolute difference. As assessed by the ICC, the agreement between our developed software and the applied volume change for different structures ranged from 0.999-1 for hemisphere, 0.976-0.998 for putamen, and 0.985-0.999 for caudate nucleus. The mean absolute differences between measured and applied volume change were 109-332 µL for hemisphere, 2.9-11.9 µL for putamen, and 2.2-10.1 µL for caudate nucleus. This method offers a reliable and robust measurement of volume change using MR images and could potentially be used to standardize clinical measurement of atrophy rates.

Tensor regularized total variation for denoising of third harmonic generation images of brain tumors.

Third harmonic generation (THG) microscopy shows great potential for instant pathology of brain tissue during surgery. However, the rich morphologies contained and the noise associated makes image restoration, necessary for quantification of the THG images, challenging. Anisotropic diffusion filtering (ADF) has been recently applied to restore THG images of normal brain, but ADF is hard-to-code, time-consuming and only reconstructs salient edges. This work overcomes these drawbacks by expressing ADF as a tensor regularized total variation model, which uses the Huber penalty and the L1 norm for tensor regularization and fidelity measurement, respectively. The diffusion tensor is constructed from the structure tensor of ADF yet the tensor decomposition is performed only in the non-flat areas. The resulting model is solved by an efficient and easy-to-code primal-dual algorithm. Tests on THG brain tumor images show that the proposed model has comparable denoising performance as ADF while it much better restores weak edges and it is up to 60% more time efficient.

Functional brain network centrality is related to APOE genotype in cognitively normal elderly.

INTRODUCTION: Amyloid plaque deposition in the brain is an early pathological change in Alzheimer's disease (AD), causing disrupted synaptic connections. Brain network disruptions in AD have been demonstrated with eigenvector centrality (EC), a measure that identifies central regions within networks. Carrying an apolipoprotein (APOE)-ε4 allele is a genetic risk for AD, associated with increased amyloid deposition. We studied whether APOE-ε4 carriership is associated with EC disruptions in cognitively normal individuals. METHODS: A total of 261 healthy middle-aged to older adults (mean age 56.6 years) were divided into high-risk (APOE-ε4 carriers) and low-risk (noncarriers) groups. EC was computed from resting-state functional MRI data. Clusters of between-group differences were assessed with a permutation-based method. Correlations between cluster mean EC with brain volume, CSF biomarkers, and psychological test scores were assessed. RESULTS: Decreased EC in the visual cortex was associated with APOE-ε4 carriership, a genetic risk factor for AD. EC differences were correlated with age, CSF amyloid levels, and scores on the trail-making and 15-object recognition tests. CONCLUSION: Our findings suggest that the APOE-ε4 genotype affects brain connectivity in regions previously found to be abnormal in AD as a sign of very early disease-related pathology. These differences were too subtle in healthy elderly to use EC for single-subject prediction of APOE genotype.

Nine-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Noncarious Cervical Lesions.

PURPOSE: One-step self-etch adhesives are among the most popular adhesives to directly bond composite to tooth tissue, mainly because of their perceived ease-of-use. The aim of this randomized controlled trial was to evaluate the clinical performance of a HEMA-free 1-step self-etch adhesive (1SEa), as compared with a 3-step etch-and-rinse adhesive (3E&Ra). MATERIALS AND METHODS: 267 non-carious cervical lesions in 52 patients were restored with a microhybrid composite Gradia Direct (GC), bonded in random order either with the HEMA-free 1SEa G-Bond (GB; GC) or the considered gold-standard 3E&Ra Optibond FL (OFL; Kerr). The restorations were evaluated after 6 months, 1, 2, 3, 5 and 9 years of clinical service for retention, marginal adaptation, marginal discoloration, caries occurrence and tooth sensitivity. Statistical analysis was done using a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 9 years was 82.6%. The overall clinical success rate was 80.3% and 79.5% for GB and OFL, respectively. In total, 47 restorations (23 GB, 24 OFL) failed because of retention loss, severe marginal defects and/or discoloration and/or caries. A similar retention rate of 89.7% was recorded for both adhesives GB and OFL. Slight marginal defects and superficial marginal discoloration, though both still clinically acceptable, were significantly more observed at the incisal enamel side of GB (92.4% and 52.1%, respectively) than OFL (59.6%; 30.8%) restorations (p < 0.05). CONCLUSION: After 9 years of clinical service, class-V restorations bonded with the HEMA-free 1SEa performed clinically equally successful as those bonded with the 3E&Ra. However, more marginal deterioration, though still clinically acceptable, was recorded at the incisal enamel side for the 1SEa.

Experimental tricalcium silicate cement induces reparative dentinogenesis.

OBJECTIVES: To overcome shortcomings of hydraulic calcium-silicate cements (hCSCs), an experimental tricalcium silicate (TCS) cement, named 'TCS 50', was developed. In vitro research showed that TCS 50 played no negative effect on the viability and proliferation of human dental pulp cells, and it induced cell odontogenic differentiation. The objective was to evaluate the pulpal repair potential of TCS 50 applied onto exposed minipig pulps. METHODS: Twenty permanent teeth from three minipigs were mechanically exposed and capped using TCS 50; half of the teeth were scheduled for 7-day and the other half for 70-day examination (n=10). Commercial hCSCs ProRoot MTA and TheraCal LC were tested as references (n=8). Tooth discoloration was examined visually. After animal sacrifice, the teeth were scanned using micro-computed tomography; inflammatory response at day 7 and day 70, mineralized tissue formation at day 70 were assessed histologically. RESULTS: Up to 70 days, TCS 50 induced no discoloration, ProRoot MTA generated gray/black discoloration in all teeth. For TCS 50, 40.0% pulps exhibited a mild/moderate inflammation at day 7. No inflammation was detected and complete reparative dentin with tubular structures was formed in all pulps after 70 days. ProRoot MTA induced a similar response, TheraCal LC generated a less favorable response in terms of initial inflammation and reparative dentin formation; however, these differences were not significant (Chi-square test of independence: p>0.05). SIGNIFICANCE: TCS 50 induced reparative dentinogenesis in minipig pulps. It can be considered as a promising pulp-capping agent, also for aesthetic areas.

GPDM- and 10-MDP-based Self-etch Adhesives Bonded to Bur-cut and Uncut Enamel - "Immediate" and "Aged" µTBS.

PURPOSE: To determine the microtensile bond strength (µTBS) of two 2-step self-etch adhesives (SEAs) to bur-cut and uncut enamel. MATERIALS AND METHODS: The buccal and lingual enamel surfaces of 15 teeth were ground flat ("bur-cut" enamel), while the enamel surface of another set of 15 teeth was solely prophylactically cleaned ("uncut" enamel). Resin composite was bonded to the surfaces using the GPDM-based SEA OptiBond XTR (Kerr), the 10-MDP-based SEA Clearfil SE Bond (Kuraray Noritake), or the 3-step etch-and-rinse adhesive (E&RA) OptiBond FL (Kerr) that served as the gold-standard control. After 1-week water storage at 37°C, specimens were serially cut into 1-mm2 stick-shaped microspecimens, of which half per tooth were further subjected to 20,000 thermocycles (TC) prior to µTBS testing. Data were statistically analyzed using ANOVA and the post-hoc Tukey test. The interfacial ultrastructure of the GPDM-based SEA OptiBond XTR with uncut and bur-cut enamel was additionally characterized with transmission electron microscopy (TEM). RESULTS: After 1-week water storage and upon TC aging, both SEAs bonded significantly (p < 0.05) less effectively to both bur-cut and uncut enamel than did the control OptiBond FL, except when OptiBond XTR was bonded to bur-cut enamel; then a similarly high µTBS was recorded (p > 0.05). TEM interfacial characterization revealed a tight interaction of Optibond XTR with both bur-cut and uncut enamel. CONCLUSION: The best bonding efficacy to enamel is still achieved by etching with phosphoric acid, following an E&R approach, while the higher etching efficacy of the GPDM-based SEA may result in equally effective bonding, provided that the enamel is bur-roughened first.